Product

Extreme Power Temperature Forcing System

-

Mechanical Devices Ltd.

Mechanical Devices Ltd.

Your product description goes here.

Product

Quartz Charge Force Rings

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Ring-style sensor configurations measure dynamic compression. Tension measurements are also possible if the unit has been installed with proper pre-load.

Product

Dynanometer Roller Set

FPS 2700 | VP 230048

-

Maschinenbau Haldenwang GmbH & Co. KG.

FPS 2700 | VP 230048 - Maschinenbau Haldenwang GmbH & Co. KG.

The FPS 2700 roller set is used in test centres and is suitable for vehicles with a single driven axle. It was designed for the exact measurement of the exhaust gas behaviour of vehicles during their transient emission test and permits a driving resistance simulation for the exhaust gas tests ASM-5015 and ASM-2525 (Acceleration Simulation Mode) in accordance with the specifications BAR '97. As a result of the increased tractive force of its eddy current brake, the FPS 2700 is additionally suitable for power measurements at constant speed and constant tractive force.

Product

Anemometers

-

MRC ltd.

MRC ltd.

ANEMOMETER from MRC.Different types of professional ANEMOMETER. Personal guidance and professional advice. Anemometer measures the speed and force of the wind.

Product

Data Acquisition

-

IMADA, Incorporated

IMADA, Incorporated

Collect force, force and displacement or torque data from force gauges, torque gauges and testers with RS-232 or USB ports.

Product

Manual Drive Unit

ATE MA260

-

INGUN Prüfmittelbau GmbH

ATE MA260 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 20 mm. Contact force max.: 300 N. Component on PCB: 58 mm

Product

Digital Torque Meter Torsion Tester

HN-1E~20E

-

Shenzhen Chuangxin Instruments Co., Ltd.

HN-1E~20E - Shenzhen Chuangxin Instruments Co., Ltd.

Digital Torque Meter is an intelligent metrologic instrument, which is designed for various torque test and calibration. It's mainly used for electic/manual torque drive, torque screwdrivers, bolt driver, tension wrench and other testers and products which refer to tightening force. It is widely applied in these industries, such as electrical manufacturing, machine manufacturing, car light industry, professional research and tests, and so on.

Product

NanoLattice Pitch Standard for Mask Handling Tools (NLSM)

-

VLSI Standards, Inc.

VLSI Standards, Inc.

The NanoLattice™ (NLSM) 100 nm pitch standard utilizes gratings with near perfect periodicity to calibrate magnification and scan linearity of CD-SEM and Atomic Force Microscopes (AFM). Make the grade, with the only pitch standard of its kind available below the 130 nm node.

Product

Extender

3690-12

-

VECTOR Electronics and Technology, Inc.

3690-12 - VECTOR Electronics and Technology, Inc.

​Contact fingers at the other end of extender card are gold plated provides low insertion force and positive contact with printed circuit boards. Receptacles have double row phosphor bronze contacts with high quality, long life mounted on top of the extender.

Product

Digital Torque Screwdriver

DID-05

-

Sugisaki Meter Co., Ltd.

DID-05 - Sugisaki Meter Co., Ltd.

Tightening of screws and bolts and final checks. Lightweight and compact with an integrated display! For checking the torque of M0.8 to M2.0 small screws. Checking the starting torque of rotating bodies such as volume hinges. In order to reduce the impact of pressing force, the weight of the main body has been minimized to about 180g. A screw tightening counter function is also included as standard. Five channels of pass/fail judgment conditions can be saved, and settings can be made simply by switching channels even if the tightening conditions change.

Product

Exchangeable Test Fixture

MA 2112/D/H/S-7/GR2270/71

-

INGUN Prüfmittelbau GmbH

MA 2112/D/H/S-7/GR2270/71 - INGUN Prüfmittelbau GmbH

Parallel contact stroke: 15 mmContact force max.: 2000 NInterface block required: Test system sideInterface signals max.: 1190Component on PCB: 58 mmPressure frame unit-opening angle: 75Installation height test probe top: 16,0 mmInstallation height test probe bottom: 10,5 mmInstallation height dual-stage test probe bottom: 16,0 mmweight: 12,13 kg

Product

Centrifuge

-

Shanghai Selon Scientific Instrument Co. Ltd.

Shanghai Selon Scientific Instrument Co. Ltd.

A device that uses centrifugal force to separate components in a liquid or gas mixture based on density.

Product

Motorized Test Stands

-

IMADA, Incorporated

IMADA, Incorporated

Imada offers basic and advanced motorized test stands that are available in Standard, High, and Low speeds.Use ZTS or ZTA force gauges with MX, MX2 or EMX Series test stands to enable force control and non destructive testing.

Product

IEC60950 50mm Impact Test Balls

CX-15

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-15 - Shenzhen Chuangxin Instruments Co., Ltd.

The Impact Test Ball is a specially machined ball to test impact resistance according to IEC, CSA and UL Standards. It is made of chrome-plated-steel for durability, and is fitted with an eyelet to facilitate testing for pendulum applications. Eyelet is threaded to the ball to allow attachment of a handle or force gauge. Weights are closely controlled.

Product

Breaking Force Tester

ZDY-02

-

Jinan Saicheng Instrument

ZDY-02 - Jinan Saicheng Instrument

ZDY-02 Breaking Force Tester is applied for break force test of the ampoule, lipstick, lip cream and other materials.

Product

Thermal Management

-

AMS Technologies AG

AMS Technologies AG

Our air cooling components dissipating heat to the ambient air comprise high-performance heat sinks, general purpose DC fans and AC fans for forced air ventilation, as well as filter fans with exchangeable exhaust filter inserts that ensure clean and reliable air exchange in cabinets.

Product

Impact Hammers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

A hammer equipped with a piezoelectric force sensor and serves to stimulate a structure that is to be examined.

Product

Level AFM

-

Anfatec Instruments AG

Anfatec Instruments AG

Is a flexible Atomic Force Microscope for scientists. It offers a wide range of modes, sophisticated spectroscopy options and the programming of user defined experiments. Besides standard options found in Anfatec's other AFMs, the level AFM allows to add Anfatec's full range of AFM options, such as KPFM, closed loop operation, automated sample motion, acoustic enclosure, humidity and temperature control ... Each instrument is adapted to the user's specific needs.

Product

Coercive Force Meter

-

Dexing Magnet Tech. Co., Ltd

Dexing Magnet Tech. Co., Ltd

The meter is mainly used in measuring the coercive force of magnetic components of relays and the mechanical energy meter compensation films, which is the essential instrument of manufacturers who are producing the relays and the energy meters, etc.

Product

Calibration Services

-

Omega Engineering, Inc

Omega Engineering, Inc

OMEGA offers a broad range of calibration services, with primary and secondary NIST traceable standards for calibrating temperature, infrared humidity, pressure, flow, and force products.

Product

Motorized Test Stands

-

AMETEK Sensors, Test & Calibration

AMETEK Sensors, Test & Calibration

Our motorized test stands are optimized for production floor operation. They provide a constant test speed and require a force gauge to be integrated with the test stand.

Product

Power Measurement

-

Precision Acoustics LTD

Precision Acoustics LTD

Precision Acoustics manufactures Radiation Force Balances and Check Sources which can be used to measure ultrasound power according to the IEC Standard 61161. All products are supplied with a calibration from The National Physical Laboratory, LONDON.

Product

Material Test Machines

-

Sanwood Environmental Chambers Co ., Ltd.

Sanwood Environmental Chambers Co ., Ltd.

Sanwood Universal Test Machines, UTM, are widely use for different material testing, like semi-product & finished product made of rubber, plastic, metal, nylon, non-woven fabrics, textile, tape, polyfoam, waterproof materials, wire, cable, etc. With different test jigs or fixtures, the UTM can run the tensile, compression, shearing foce, adhesion, peeling force, tear strength, fatigue, etc test according to GB, CNS, ASTM, ISO, DIN, JIS, EN test standards.