Product

Portable Oscilloscope

IkaScope WS200

-

Ikalogic s.a.s.

IkaScope WS200 - Ikalogic s.a.s.

IkaScope is a new kind of instrument: It’s a full featured oscilloscope fitted inside a WiFi connected probe. IkaScope takes no extra space on your desk and follows you everywhere with a 1-week battery life. It connects to your computer, smartphone or tablet to display captured signals.

Product

Temperature Transmitter

H4431

-

COMET SYSTEM, s.r.o.

H4431 - COMET SYSTEM, s.r.o.

For external Pt1000 temperature probe. Three two-state inputs.

Product

Probing Solutions

-

High Power Pulse Instruments GmbH

High Power Pulse Instruments GmbH

Probing Solutions and Probe Arms by HPPI GmbH

Product

Precision Picoprobe™ Micropositioner Probe Holder Kit

PHD-3001A

-

High Power Pulse Instruments GmbH

PHD-3001A - High Power Pulse Instruments GmbH

*Pulse force and pulse sense fixed pitch and flexible pitch RF probing solution for TLP/VF-TLP/HMM on-wafer measurements using Picoprobe™ Model 10*High peak current capability 80 A (100 ns)*DC – typ. 7 GHz bandwidth*Isolated probe-head ground shield for high pulse sense common mode signal rejection*Including fixed pitch replacement probe tip 50 Ω, right, 100 µm pad pitch*Including fixed pitch replacement probe tip 5 kΩ, left, 100 µm pad pitch*Including flexible pitch clamps plus 10-5k(0502)-125-W-1 and 10-50/30-125-W-1 replacement probe tips*True coaxial high-resolution 80:1 rotary probe-head for accurate probe tip adjustment

Product

Spring Probe For Testing Bare Board And/or PCB

-

KITA Manufacturing Co.,Ltd.

KITA Manufacturing Co.,Ltd.

You can see Spring Probe for testing bare board and PCB here. Standard pitch is from 0.5mm to 3.0mm.

Product

25 GHz Differential Probe with 2.92mm Interface

DH25-2.92MM

-

Teledyne LeCroy

DH25-2.92MM - Teledyne LeCroy

Teledyne LeCroy’s DH series 8 to 30 GHz differential probes offer the combination of bandwidth, input range and offset capability to address any high-speed probing requirement from debugging serial data interfaces to validating DDR memory systems. DH series probes provide superior loading characteristics and are calibrated with a custom “fine-tuned” frequency response. The ultra-low loading and flat frequency response ensure accurate measurements.

Product

Flying Probe Testers

-

SPEA S.p.A.

SPEA S.p.A.

SPEA’s Flying Probe Testers help manufacturers of printed circuit boards to deliver top-quality products in the fastest time-to-market, avoiding fixture cost and increasing accessibility when compared to bed-of-nails testers.

Product

VELOCICALC Multi-Function Ventilation Meter

9565-A

-

TSI Inc.

9565-A - TSI Inc.

The portable, handheld VELOCICALC® Multi-Function Ventilation Meter 9565-A features a menu-driven user interface for easy operation in your local language. On-screen prompts and step-by-step instructions guide the user through instrument setup, operation, and field calibration. The 9565-A also features an ergonomic, overmolded case design with probe holder and a keypad lockout to prevent tampering during unattended use. The 9565-A model includes the Articulated Probe 966 and is designed for use with a range of plug-in probes.

Product

High Impedance Active Probes

7A

-

Picoprobe

7A - Picoprobe

An unterminated version, can be used for capacitance and resistance measurements or in low to medium speed signal applications where a 50 ohm termination is not required. A flexible coaxial cable length of 6 feet in length is standard on the Model 7A; however, when used for capacitance measurements, GGB Industries, Inc., recommends using a shorter 3 foot cable. If a shorter length of cable is desired for capacitance measurements, please specify it when ordering (Model 7A-3ft.). Please note that Model 7A uses Model 7 replacement tips.

Product

High Flexibility VNA Cables

-

Fairview Microwave Inc.

Fairview Microwave Inc.

Our lines of high frequency VNA test cables display excellent electrical properties such as wonderful phase stability of +/- 6° at 50 GHz and +/- 8° at 67 GHz as well as VSWR of 1.3:1 at 50 GHz and 1.4:1 at 67 GHz. The 50 GHz assemblies are terminated with 2.4mm connectors while the 67 GHz versions utilize 1.85mm connectors. The braided stainless steel armoring surrounding the coax provides a rugged, but flexible cable with a flex life exceeding 100,000 cycles, making these test cables ideal for use in semiconductor probe testing, precise bench top testing as well as lab/production testing where the need for a highly flexible, yet durable cable solution is required. The VNA test cables are also equipped with rugged stainless steel connectors that provide up to 5,000 mating cycles when attached with proper care. Additionally, the flexibility of these cables makes it easier and safer to test a Device Under Test (DUT). A swept right angle 2.4mm and 1.855mm connector option allows these cables to fit in tight spaces and can reduce the length of cable required in many applications.

Product

2 inputs Centesimal Thermometer Pt100

HD2127.1

-

Senseca

HD2127.1 - Senseca

Centesimal thermometer in the range ±199.99 °C, decimal outside this range, 2 inputs for Pt100 probes with SICRAM module. Measuring range -200 °C…+650 °C.

Product

Function Probe Series

-

YOKOWO Co., Ltd.

YOKOWO Co., Ltd.

This affordable tool can be kept nearby for quick measuring whenever needed.

Product

Flexible Magnetic Field Probes

-

Projekt Elektronik Mess- und Regelungstechnik GmbH

Projekt Elektronik Mess- und Regelungstechnik GmbH

The active probes are equipped with active amplifier electronics and have an extremely low-impedance output, ie they can also drive long lines. The output signal is calibrated according to specification. They can not only be connected to a certain type of teslameter, but can also be connected to any signal input.

Product

Clamp Meters

-

Nanjing ELIKE Meter Co, Ltd.

Nanjing ELIKE Meter Co, Ltd.

Basic functions:AC current: 40/400/1000ADC current: 40/400/1000AAC voltage: 4/40/400/750VDC voltage: 400mV/4/40/400/1000VResistor: 400/4/40/400K/4/40MTemperature: -20 to +750°CFrequency: 10/100/1000Hz/10/100kHz/10MHzDuty cycle: 0.1 to 99.9%Capacitance: 5nF/50nF/500nF/5μF/50μF/200μFSpecial functions:Auto rangingNCVDiodeContinuity buzzerLow battery displayData holdRelative data holdAuto/manual range shiftZeroAuto power-offOverload protectionSampling frequency: 3 times/sMaximum display: 3999Maximum open distance of clamp mouth: 55mmGeneral characteristics:Color: iron gray and orangeNet weight: approximately 274gLCD size: 46 x 32mmSize: 245 x 90 x 33mmPower: 1 x 9V and 6F22Packing content:CartonHandheld bagEnglish manualTesting leadBatteryTemperature probe

Product

Interchangeable Temperature Humidity Probes

S.TC series

-

Senseca

S.TC series - Senseca

Interchangeable temperature and humidity probes with SICRAM 2 module and with cable for the HD2717T… and the HD2817T… transmitters series.

Product

2kV, 80 MHz High Voltage Differential Probe

HVD3206A-6M

-

Teledyne LeCroy

HVD3206A-6M - Teledyne LeCroy

The HVD3000A series of high voltage differential probes cover the fullest range of applications, from 120/240 V switch-mode power supplies through 600 V class and 5 kV electrical apparatus. The table below provides a list of recommended probe models based on specific device under test applications.

Product

Scanning Electrochemical Systems

-

Ametek Scientific Instruments

Ametek Scientific Instruments

The VersaSCAN is a single platform capable of providing spatial resolution to both electrochemical and materials-based measurements. Each VersaSCAN is based on a common high-resolution, long-travel, closed-loop positioning system mounted to a vibration-resistant optical base. Different auxiliary pieces are mounted to the positioning system. These ancillary pieces (e.g., an electrometer, piezo vibration unit, or a laser sensor) provide functionality to the positioning system for different scanning probe experiments. VersaSTAT potentiostats and Signal Recovery Lock-in Amplifiers are integrated via ethernet control to make accurate measurements of these small signals.